Tow-starting and towing

Transporting your vehicle

Note

Your vehicle is not permitted to be towed. Therefore, contact a service center in the event of a breakdown.

Have your vehicle transported on a loading Do not have the vehicle towed

Have your vehicle transported on a loading platform only; otherwise, damage may occur.

Tow truck

Do not lift the vehicle

Do not lift the vehicle by the tow fitting or Do not lift the vehicle

Do not lift the vehicle by the tow fitting or body and chassis parts; otherwise, damage may result.

Tow-starting

Do not tow-start the vehicle.

Due to the automatic transmission, the engine cannot be started by tow-starting.

Have the cause of the starting difficulties remedied.

Towing other vehicles

General information

Your vehicle must not be lighter than the Light towing vehicle

Your vehicle must not be lighter than the vehicle being towed; otherwise, it will not be possible to control vehicle response.

Attach the tow bar or tow rope to the tow Attaching the tow bar/tow rope correctly

Attach the tow bar or tow rope to the tow fitting; connecting it to other vehicle parts may cause damage.

  • Switch on the hazard warning system, depending on local regulations.
  • If the electrical system has failed, clearly identify the vehicle being towed by placing a sign or a warning triangle in the rear window.

Towing methods when towing other vehicles

Tow bar

The tow fittings used should be on the same side on both vehicles.

Should it prove impossible to avoid mounting the tow bar at an offset angle, please observe the following:

  • Maneuvering capability is limited during cornering.
  • The tow bar will generate lateral forces if it is secured with an offset.

Tow rope

When starting to tow the vehicle, make sure that the tow rope is taut.

To avoid jerking and the associated stresses on the vehicle components when towing, always use nylon ropes or nylon straps.

Only secure the tow rope on the tow fitting; Attaching the tow rope correctly

Only secure the tow rope on the tow fitting; otherwise, damage can occur when it is secured on other parts of the vehicle.

Tow fitting

The screw-in tow fitting should always be carried

The screw-in tow fitting should always be carried in the vehicle. It can be screwed in at the front or rear of the BMW. It is located in the container on the inside of the trunk lid.

Tow fitting, information on use

  • Use only the tow fitting provided with the vehicle and screw it all the way in.
  • Use the tow fitting for towing on paved roads only.
  • Use the tow fitting screwed in at the front for maneuvering the vehicle only.
  • Avoid lateral loading of the tow fitting, e.g., do not lift the vehicle by the tow fitting.

Otherwise, damage to the tow fitting and the vehicle can occur.

Screw thread

Push out the cover by pressing on the arrow

Push out the cover by pressing on the arrow symbol.

    See also:

    Display
    Display 1 Navigation instructions 2 Active Cruise Control with Stop & Go function 3 Lane departure warning 4 Cruise control/desired speed 5 Current speed The Check Control messages are dis ...

    Vehicle equipment
    All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, ...

    All around the headliner
    1 Emergency Request 2 Glass sunroof, powered 3 Indicator lamp, front passenger airbag 4 Reading lamps 5 Interior lamps ...