Malfunction
Comfort Access may not function properly if it experiences interference from local radio waves, e.g., mobile phones.
If this occurs, open or close the vehicle using the buttons on the remote control or use the integrated key in the door lock.
To start the engine afterward, insert the remote control into the ignition switch.
Warning lamps
The warning lamp in the
instrument
cluster lights up when you attempt to
start the engine: the engine cannot be
started.
The remote control is not in the vehicle or has a malfunction. Take the remote control with you inside the vehicle or have it checked. If necessary, insert another remote control into the ignition switch.
The warning lamp in the
instrument
cluster lights up while the engine is
running: the remote control is no longer
inside the vehicle.
After switching off the engine, the engine can only be started again within approx. 10 seconds if no door has been opened.
The indicator lamp in the
instrument
cluster comes on and a message appears
on the Control Display: replace
the remote control battery.
See also:
Engine specifications
The rated power outputs are established on the
basis of fuel grade AKI 91.
...
Entering a house number separately
Depending on the data in the navigation system,
house numbers up to number 2,000 can be entered.
1. ›House number‹
2. Say the house number.
Say each digit separately.
3. Continue making the entr ...
Planning a trip with intermediatedestinations
New trip
1. "Navigation"
2. "Map"
3. Move the controller to the left if necessary.
4. "Guidance"
5. "Enter new destination"
6. Select the type of destina ...