Checking the oil level

The concept

The oil level is monitored electronically and displayed on the Control Display.

Requirements

  • The engine must be running and warm after the vehicle has been driven for at least 6 miles/10 km.
  • The vehicle is stopped or being driven on a level roadway.

Displaying the oil level

1. "Vehicle Info"
2. "Vehicle status"
3. "Engine oil level"

Possible messages

Possible messages

  • "Engine oil level OK"
  • "Measurement not possible at this time."
  • "Measuring engine oil level..."

Duration with the engine running: approx. 3 minutes.

Duration while driving: approx. 5 minutes.

  • "Engine oil level below minimum. Add 1 quart!"
    Add oil within the next 125 miles/200 km.
  • "Engine oil level too high! Have this checked."

Have the vehicle checked immediately.

Have the vehicle checked immediately; Too much engine oil

Have the vehicle checked immediately; otherwise, surplus oil can lead to engine damage.

checked." "Measurement inactive. Have this checked."

Note the newly calculated remaining mileage until the next oil service. Have the system checked as soon as possible.

    See also:

    Programmable memory buttons
    General information The Owner's Manual can be stored on the programmable memory buttons and called up directly. Storing 1. "Owner's Manual" Select via the iDrive. 2. Press the desired ...

    Glove compartment
    Front passenger side Opening Pull the handle. The light in the glove compartment switches on. Close the glove compartment again immediately Close the glove compartment immediately after use ...

    Entering a phone number
    Dialing a number 1. "Telephone" 2. "Dial number" 3. Select the digits individually. 4. Select the symbol. Dialing a number The phone number can also be entered by voice. ...