Configuring the devices

Additional functions can be activated or deactivated for paired and connected devices.

1. "Telephone"

2. "Bluetooth® (phone)"

3. Highlight the device to be configured.

4. Open "Options".

5. "Configure phone"

6. At least one function must be selected.

  • "Telephone"
  • "Additional telephone"
  • "Audio"

7. "OK"

If a function is assigned to a device, the function will be deactivated where appropriate for a device that is already connected and the device will be unpaired.

    See also:

    Protective action
    Airbags are not triggered in every impact situation, e.g., in less severe accidents or rear-end collisions. Information on how to ensure the optimal protective effect of the airbags ► Keep ...

    Low tire pressure message
    The yellow warning lamp lights up. A Check Control message is displayed. ▷ There is a flat tire or a major loss in tire inflation pressure. ▷ The system was not reset after a wheel ...

    Manual release
    The parking brake can be released manually in the event of a power failure or electrical fault. Before releasing, secure the vehicle against rolling Before releasing the parking brake manually, ...