Headphones, vehicle loudspeakers
Connecting the headphones
Normal headphones
Connect via the jack 1/8"/3.5 mm, on the rear CD/DVD player.
Infrared headphones
Connection via the infrared interface on the lower edge of the screen.
Fitting infrared headphones and information on which headphones are supported can be obtained from your service center.
When using infrared headphones, ensure that the connection between the headphones and the infrared interface is not disrupted:
- Do not place an obstacle between the interface and headphones.
- Do not cover the interface.
- Do not scratch the interface.
Fold up display screens for interference-free reception.
Unfavorable light conditions such as bright ambient light can impair reception.
Sound output on the headphones or vehicle loudspeakers
Operation is only possible in the rear.
1. Open "Options".
2. "Headphones" or "Loudspeakers"
With the following setting, sound output in the rear is not possible via the vehicle speakers: "Driver control".
See also:
Voice phone book
Depending on how your vehicle is equipped, it
may be necessary to create your own voice
phone book.
The entries must be entered using voice activation
and are separate from the memory in the
...
Switching the high beams on and offmanually
► High beams on, arrow 1.
► High beams off/headlamp flasher, arrow 2.
The High-beam Assistant can be switched off
when manually adjusting the light. To reactivate
the High-beam Assis ...
Programming
▷ LED, arrow 1.
▷ Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press the two outer memory buttons 1 and
3 for approx. 20 ...