Reassigning individual programs
1. Switch on the ignition.
2. Hold the hand-held transmitter a distance of approx. 2 to 8 in/5 to 20 cm from the memory buttons.
3. Press the memory button of the universal remote control.
4. If the LED flashes slowly after approx. 20 seconds, press the transmit button on the hand-held transmitter.
5. Release both buttons when the LED flashes
rapidly.
If the LED does not flash rapidly after approx.
15 seconds, change the distance and repeat
the step.
See also:
Treble, bass, balance, andfader
► "Treble": treble adjustment.
► "Bass": depth adjustment.
► "Balance": left/right volume distribution.
► "Fader": front/rear volume ...
Storage compartments
The following storage compartments are available
in the vehicle interior:
Glove compartment on the driver's and front
passenger side.
Storage compartment in the center armrest, in the front ...
Snap-in adapter
The snap-in adapter is used to:
▷ Hold the mobile phone.
▷ Recharge the battery.
▷ Connect the mobile phone to an outside antenna
of the vehicle.
This provides for better netwo ...