Display on the Control Display

Switching on the backup camera via iDrive

With Top View switched on:

The backup camera image is displayed. The setting "Rear view camera"

The backup camera image is displayed. The setting is stored for the remote control currently in use.

Brightness

With Top View switched on:

1. 2. Turn the controller until the desired setting "Brightness"

2. Turn the controller until the desired setting is reached and press the controller.

Contrast

With Top View switched on:

1. 2. Turn the controller until the desired setting "Contrast"

2. Turn the controller until the desired setting is reached and press the controller.

Displaying the turning circle and pathway lines

  • The static, red turning circle line shows the space needed to the side of the vehicle when the steering wheel is turned all the way.
  • The variable, green pathway line assists you in assessing the amount of space actually needed to the side of the vehicle.

The pathway line is dependent on the current steering angle and is continuously adjusted with the steering wheel movement.

Turning circle and pathway lines are displayed. "Parking aid lines"

Turning circle and pathway lines are displayed.

    See also:

    Driver's door controls
    Roller blind for rear window Press the button. Extending or retracting the roller blinds together Press and hold the button. ...

    Preparation
    1. Check whether the battery of the other vehicle has a voltage of 12 volts. This information can be found on the battery. 2. Switch off the engine of the assisting vehicle. 3. Switch off any el ...

    Drive-off assistant
    This system supports driving away on gradients. The parking brake is not required. 1. Hold the vehicle in place with the foot brake. 2. Release the foot brake and drive away without delay. After ...