Switching on/off manually

Press the button.

Press the button.

  • On: the LED lights up.
  • Off: the LED goes out.

The PDC is shown on the Control Display. Switch on the backup camera via the iDrive.

    See also:

    Automatic locking
    The setting is stored for the remote control currently in use. 1. "Settings" 2. "Door locks" 3. Select the desired function: ► "Lock if no door is opened" T ...

    Measurement
    Measurements are made by ultrasound sensors in the bumpers. The range is approx. 6 ft/2 m. An acoustic warning is first given: ▷ By the front sensors and two rear corner sensors at approx ...

    Storing a channel
    1. "Radio". 2. "Satellite radio". 3. If necessary, open "All channels" or the desired category. 4. Select the desired channel. 5. Press the controller again. 6. Pr ...