See also:

Programming
LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...

Coolant temperature
A warning lamp will come on if the coolant, and therefore the engine, becomes too hot. In addition, a message will appear on the Control Display. Check the coolant level ...

General information
Danger of burns from hot engine Do not open the cooling system while the engine is hot; otherwise, escaping coolant may cause burns. Suitable additives Only use suitable additives; otherwise, ...