The concept
Integral Active Steering is a combination of Active Steering and rear axle steering.
Active Steering varies the steering angle of the wheels in relation to the steering wheel movement as a function of the speed.
At speeds up to approx. 37 mph/60 km/h, e.g., in curves, the steering angle is increased, i.e., steering becomes more direct.
The rear axle steering acts to increase maneuverability by turning the rear wheels slightly in a direction opposite to the front wheels. At higher speeds, the steering angle is increasingly reduced.
The rear wheels are turned to the same angle as the front wheels.
In critical situations, Integral Active Steering can specifically steer the front and rear wheels to stabilize the vehicle before the driver intervenes, e.g., when braking where road conditions differ on the left and right sides of the vehicle.
See also:
Additional functions
Activating/deactivating the additional
functions
Activate the functions before pairing to be able
to use them in the vehicle. Information on suitable
mobile phones that support these functions,
r ...
Displays in the instrument cluster
Desired speed
▷ The marking lights up in
green: the system is active.
▷ The marking lights up in orange:
the system has been
interrupted.
▷ The marking does not light up: th ...
Automatic deactivation during forward travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on if necessary. ...