Using voice activation
Activating the voice activation system
1. 
Press the button on the
steering
wheel.
2. Wait for the signal.
3. Say the command.
The command appears on the Control Display.
The symbol on the Control
Display indicates
that the voice activation system is active.
If no other commands are available, continue operating the function via iDrive.
Terminating the voice activation system
Briefly press the button on the steering wheel or ›Cancel‹.
See also:
1 Series M
Rather than the single-turbo setup from the 135i, the 1 Series M gets a
twin-turbo six-cylinder that's good for 335 hp and 332 pounds-feet of torque. In
extreme situations, the 1 Series M can ente ...
Coolant level
Checking
1. Let the engine cool.
2. Turn the cap of the expansion tank slightly
counterclockwise to allow any excess pressure
to dissipate, and then open it.
3. The coolant level is correct if ...
Message when the system was not
reset
A Check Control message is displayed.
The system detected a wheel change but was
not reset.
Warnings regarding the current tire inflation
pressure are not reliable.
Check the tire inflation pre ...