Status display
The tire and system status is indicated by the color of the tires.
A change in the tire inflation pressure during driving is taken into account.
A correction is only necessary if this is indicated by the TPM
Wheels, green
The tire inflation pressure is equal to the target state.
One wheel is yellow
A flat tire or major drop in inflation pressure in the indicated tire.
All wheels are yellow
- A flat tire or major drop in inflation pressure in several tires.
- The system was not reset after a wheel change and thus warns based on the inflation pressures initialized last.
- A flat tire in one or more tires while the system is being reset.
Wheels, gray
The system cannot detect a flat tire. Reasons for this may be:
- TPM is being reset.
- Disturbance by systems or devices with the same radio frequency.
- Malfunction.
For Canadian models: additional information
The status display additionally shows the current tire inflation pressures and tire temperatures.
When correcting the tire inflation pressures, note the following:
The tire pressure increases as the tire temperature increases.
Therefore, only correct the tire inflation pressure when the tire is at the ambient temperature. Compare the displayed tire temperature with the external temperature in the instrument cluster.
See also:
Software Update
The vehicle supports various external devices
depending on the current software version. With
a software update, the vehicle can support new
cell phones or new external device, for example.
The ...
Securing cargo
Lashing eyes in the cargo area
To secure the cargo, there are four lashing eyes
in the cargo area
Securing cargo
Smaller and lighter items: secure with retaining
straps or with a cargo ne ...
Charging the battery
In the vehicle, only charge the battery via the
terminals in the engine compartment, with the engine switched off. ...