Switching the high beams on and off manually

- High beams on, arrow 1.
- High beams off/headlamp flasher, arrow 2.
To reactivate the High-beam Assistant, press the button on the turn signal lever.
See also:
Flat Tire Monitor FTM
The conceptThe system does not measure the actual inflation pressure in the tires.
The system detects a pressure loss in a tire by comparing the rotational speeds
of the individual wheels while mov ...
Fuel filler flap
Opening
1. Open the fuel filler flap. To do so, lightly press the rear edge.
2. Turn the fuel cap counterclockwise.
3. Place the fuel cap in the bracket attached to the fuel fille ...
Service and warranty
We recommend that you read this publication
thoroughly. Your vehicle is covered by the following
warranties:
▷ New Vehicle Limited Warranty
▷ Rust Perforation Limited Warranty
υ ...
