Headlamp courtesy delay feature
The low beams stay lit for a short while after the ignition is switched off, if the lamps are switched off and the headlamp flasher is switched on.
Setting the duration
1. "Settings" 2. "Lighting" 3. "Pathway light.: s" 4. Set the duration.
4. Set the duration.
The setting is stored for the remote control currently in use.
See also:
Actions in the event of a flat tire
Normal tires
1. Identify the damaged tire.
Do this by checking the air pressure in all
four tires.
If the tire inflation pressure in all four tires is
correct, the Tire Pressure Monitor may no ...
Tone control
You can alter various tone settings, e.g. treble and bass or the speed-dependent
volume increase.
The tone settings are applied to all audio sources.
The settings are stored for the remote control ...
Switching off automatically
The system switches off and the LED goes out:
▷ After approx. 165 ft/50 m when driving forward.
▷ After approx. 22 mph/35 km/h when driving
forward.
Switch on the system again if nece ...