Washer fluid reservoir

Only add washer fluid when the engine is Adding washer fluid

Only add washer fluid when the engine is cool, and then close the cover completely to avoid contact between the washer fluid and hot engine parts.

Otherwise, there is the danger of fire and a risk to personal safety if the fluid is spilled.

All washer nozzles are supplied from one reservoir.

All washer nozzles are supplied from one reservoir.

Fill with water and – if required – with a washer antifreeze, according to the manufacturer's recommendations.

Mix the washer fluid before adding to maintain the correct mixing ratio.

Capacity

Approx. 5.3 US quarts/ 5 liters

    See also:

    Coolant temperature
    A warning lamp will come on if the coolant, and therefore the engine, becomes too hot. In addition, a message will appear on the Control Display. Check the coolant level ...

    In interior
    The fuses are located in the front passenger footwell on the underside of the instrument cluster. 1. Unscrew screws, refer to arrows, of footwell trim panel. 2. Lay the trim panel in the footw ...

    After washing the vehicle
    After washing the vehicle, apply the brakes briefly to dry them; otherwise, braking action can be reduced and corrosion of the brake discs can occur. ...