Front active seat ventilation
The seat cushion and backrest surfaces are cooled by means of integrated fans.
The ventilation rapidly cools the seat, e.g., if the vehicle interior is overheated or for continuous cooling at high temperatures.

Switching on
Press the button once for each
ventilation
level.
The highest level is active when three LEDs are lit.
After a short time, the system automatically moves down one level in order to prevent excessive cooling.
Switching off
Press the button longer.
The LEDs go out.
See also:
Using this Owner's Manual
The fastest way to find information on a particular
topic is by using the index.
An initial overview of the vehicle is provided in
the first chapter.
Additional sources of information
Should yo ...
Low tire pressure message
The yellow warning lamp
lights up. A
Check Control message is displayed.
► There is a flat tire or a major loss in
tire inflation pressure.
► The system was not reset after ...
Radar sensors
The radar sensors are located under the rear
bumper.
The system may not be fully functional in the
following situations:
▷ Dirty or icy bumper.
▷ Stickers on the bumper.
A Check ...
