Gentleman function
The front passenger seat can be adjusted with the switches of the driver's seat.
1. 
Press the button. The LED
lights up.
2. Adjust the front passenger seat on your own seat.
3. If needed, store the memory position, for the front passenger seat.
4. Press the button to deactivate the function. The LED goes out.
The function deactivates itself automatically after some time.
See also:
Programming
Programming
1. Memory buttons
2. LED
Fixed-code hand-held transmitters
1. Switch on the ignition, refer to page 61.
2. Initial setup:
Press both outer memory buttons 1 for approx.
20 seconds ...
Managing music
Albums
Renaming an album
The name of the album, if available, is automatically
entered when the album is stored. If the
name is not available, it can be changed later if
desired.
1. "CD/ ...
Display on the Control Display
Switching on the backup camera via
iDrive
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The setting
is stored for the remote control currently in
use ...