Pinch protection
If the closing force exceeds a specific value as a window closes, the closing action is interrupted. The window reopens slightly.
Danger of pinching even with pinch protection
Even with the pinch protection system, check that the window's closing path is clear; otherwise, the closing action may not stop in certain situations, e.g., if thin objects are present.
Window accessories
Do not install any accessories in the range of movement of the windows; otherwise, the pinch protection system will be impaired.
Closing without the pinch protection system
Danger of pinching
Monitor the closing process and make sure that the closing path of the window is clear; otherwise, injuries may result.
For example, if there is an external danger or if ice on the windows prevents a window from closing normally, proceed as follows:
1. Pull the switch past the resistance point and
hold it there.
Pinch protection is limited and the window
reopens slightly if the closing force exceeds
a certain value.
2. Pull the switch past the resistance point
again within approx. 4 seconds and hold it
there.
The window closes without pinch protection.
See also:
Message when the system was not
reset
A Check Control message is displayed.
The system detected a wheel change but was
not reset.
Warnings regarding the current tire inflation
pressure are not reliable.
Check the tire inflation pre ...
Malfunction
Comfort Access may not function properly if it
experiences interference from external sources
such as mobile phones, metal objects, overhead
power lines, transmission towers, etc.
In this case, ...
Wheel and tire combination
Information on the right wheel and tire combination
and rim version for your vehicle can be
obtained from the service center.
Incorrect wheel and tire combinations impair the
function of a vari ...