Using voice activation
Activating the voice activation system
1. 
Press the button on the
steering
wheel.
2. Wait for the signal.
3. Say the command.
The command is displayed in the instrument cluster.
This symbol in the instrument
cluster indicates
that the voice activation system is active.
If no other commands are available, continue operating the function via iDrive.
Terminating the voice activation system
Briefly press the button on the steering wheel or ›Cancel‹.
See also:
Checking the pressure
Only check the tire inflation pressure when the
tires are cold. This means after driving no more
than 1.25 miles/2 km or when the vehicle has
been parked for at least 2 hours. When the tires
are w ...
Opening
1. Unlock the belt lock of the center safety belt
in the rear using the latch plate of another
safety belt.
2. Insert the latch plate at the end of the belt
into the specially designated fixtur ...
Windshield washer nozzles
The washer jets are automatically heated whenever
the ignition is switched on.
...