Programmable memory buttons

General information

The iDrive functions can be stored on the programmable memory buttons and called up directly, e.g., radio stations, navigation destinations, phone numbers and entry points into the menu.

The settings are stored for the remote control currently in use.

Saving a function

1. Highlight the function via the iDrive.

2. more Press the desired button for more than 2 seconds.

Running a function

The function will run immediately. This Press the button.

The function will run immediately. This means, for example, that the number is dialed when a phone number is selected.

Displaying the button assignment

Use a finger to touch the buttons. Do not wear gloves or use objects.

The key assignment is displayed at the top edge of the screen.

  • To display short information: touch the button.
  • To display detailed information: touch the button for an extended period.

Deleting the button assignments

1. Press buttons 1 and 8 simultaneously for approx. five seconds.
2. "OK"

    See also:

    Switching on/off manually
    Press the button. ▷ On: the LED lights up. ▷ Off: the LED goes out. If Top View is displayed, switch on the backup camera via the iDrive, ...

    Modern cockpit with clear orientation to the driver
    The cockpit is inclined towards the driver at an angle of approximately 7° and the asymmetrically designed center console likewise emphasizes this clear orientation to the driver. The horizontal l ...

    Signal tones
    When approaching an object, an intermittent tone is sounded that indicates the position of the object. For example, if an object is detected to the left rear of the vehicle, a signal tone sounds ...