Coolant level

Checking

1. Let the engine cool.
2. Turn the cap of the expansion tank slightly counterclockwise to allow any excess pressure to dissipate, and then open it.

3. The coolant level is correct if it lies between

3. The coolant level is correct if it lies between the minimum and maximum marks in the filler neck.

4. If the coolant is low, slowly add coolant up to

4. If the coolant is low, slowly add coolant up to the specified level; do not overfill.
5. Turn the cap until there is an audible click.
6. Have the cause of the coolant loss eliminated as soon as possible.

    See also:

    Notes
    ▷ Do not cover lower screen edge, since this is where the sensors and the infrared interface are installed. ▷ When loading the rear seats and adjusting the backrest of the front sea ...

    Belt-force limiter
    The effect of the belt-force limiter on the driver's seat is dependent on the position of the driver's seat. To maintain the long-term accuracy of this function, the driver's seat must be calib ...

    Automatic-Transmission
    Switching off the engine 1. Engage transmission position P with the vehicle stopped. 2. Press the Start/Stop button. The engine is switched off. The radio ready state is switched on. 3. Set the ...