All other models: Oil levelcheck

The concept

The oil level is monitored electronically during driving and shown on the Control Display.

If the oil level reaches the minimum level, a check control message is displayed.

Requirements

► The engine must be running and warm after the vehicle has been driven for at least 6 miles/10 km.
► The vehicle is stopped or being driven on a level roadway.

Displaying the oil level

1. "Vehicle Info"
2. "Vehicle status"
3. Possible messages "Engine oil level"

Possible messages

► "Engine oil level OK"
► "Measurement not possible at this time."
► "Measuring engine oil level..."

Duration with the engine running: approx.

3 minutes.

Duration while driving: approx. 5 minutes.

► "Engine oil level below minimum. Add 1 quart "
Add oil within the next 125 miles/200 km.

► "Engine oil level too high Have this checked."

Have the vehicle checked immediately.

Have the vehicle checked immediately; Too much engine oil
Have the vehicle checked immediately; otherwise, surplus oil can lead to engine damage.◄

► "Measurement inactive. Have this checked." Note the newly calculated remaining mileage until the next oil service. Have the system checked as soon as possible.

    See also:

    The concept
    This system projects important information into the driver's field of vision, e.g., navigation instructions. In this way, the driver can get information without averting his or her eyes from the ...

    Route criteria
    General information ▷ The route calculated can be influenced by selecting certain criteria. ▷ The route criteria can be changed when the destination is entered and during destination ...

    Switching off automatically
    The system switches off and the LED goes out: After approx. 160 ft/50 m when driving forward. Above approx. 22 mph/36 km/h when driving forward. Switch on the system again if necessary. ...