What to do if...
Information on suitable mobile phones, refer to page 204.
Appointments, tasks, notes, text messages, or e-mails from the mobile phone are not displayed.
► The mobile phone is not capable of the
missing function or is not connected correctly.
► The Office function is deactivated.
► The mobile phone is connected as an additional
phone.
► Appointments are older than 20 days or are
more than 50 days in the future.
► The tasks have been marked as completed
or have a due date that lies more than
90 days in the future.
► Depending on the number of stored appointments,
task notes, and messages in
the mobile phone, not all are displayed in the
vehicle.
Not all appointments and tasks from the mobile
phone are displayed at the right time?
► The time zone, time or date is incorrectly set
on the Control Display and mobile phone.
The e-mail attachment is not displayed.
► E-mails are transmitted without an attachment.
Entries are not displayed in full length.
► Text were already transmitted from the mobile
phone in a shortened form.
► Synchronization between the mobile phone
and vehicle may take several minutes.
The contact pictures are not being displayed?
► Up to 200 contact pictures can be stored in
the vehicle.
The E-mail is displayed with a delay?
► Check the e-mail settings on the mobile
phone and adjust if necessary.
If all points in this list have been checked and the required function is still not available, contact the hotline or service center.
See also:
Selecting the display
1. Press the button.
2. "Split screen"
3. Move the controller until the split screen is
selected.
4. Press the controller or select "Split screen
content".
5. Select the d ...
Notes on EmergencyRequests
Do not use the voice activation system to initiate
an Emergency Request. In stressful situations,
the voice and vocal pitch can change. This can
unnecessarily delay the establishment of a telephone ...
Display on the Control Display
Switching on the backup camera via
iDrive
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The setting
is stored for the remote control currently in
use ...
