Additional functions

Activating/deactivating the additional functions

Activate the functions before pairing to be able to use them in the vehicle. Information on suitable mobile phones that support these functions, refer to page 204.

1. "Telephone"
2. "Bluetooth® (phone)"
3. Open "Options".
4. "Configure Bluetooth®"
5. Select the desired additional function.

► "Additional telephone"
► "Office"
► "Bluetooth® audio"

6. "OK"

As long as an additional function is deactivated, it cannot be assigned to a telephone.

Additional telephone

A mobile phone can be used as an additional telephone.

The additional telephone can be used to accept incoming calls. While a call is active on the additional telephone, incoming calls are displayed on the Control Display.

Audio source

A mobile phone can be used as an audio source.

    See also:

    Increasing or reducing speed
    The speed can be changed in the range from approx. 4 mph/6 km/h to approx. 15 mph/25 km/ h by pressing the accelerator or brake pedal lightly. A target speed within the same range can be spec ...

    Manual transmission
    Observe before towing your vehicle The parking brake is blocked The parking brake cannot be released manually. When the parking brake is blocked, do not tow with the front axle lifted or the v ...

    Requirements
    Via the Control Display, set a language that is also supported by the voice activation system so that the spoken commands can be identified. Set the language ...