Pairing/unpairing the mobile phone
General information
The following functions are available:
► Use of a mobile phone as a telephone.
► Use of a mobile phone as an additional telephone.
► Use of a mobile phone as an audio source.
► Use of an audio device as an audio source.
Requirements
► The mobile phone is suitable.
► The mobile phone is ready for operation.
► Bluetooth is activated in the vehicle and on
the mobile phone.
► Bluetooth presettings may need to be made
on the mobile phone, e.g., for a connection
without confirmation or visibility, refer to the
mobile phone operating instructions.
► Deactivate Bluetooth audio if necessary.
► A number with at least four and a maximum
of 16 digits was defined as the Bluetooth
passkey. It is only required once for pairing.
► The ignition is switched on.
See also:
iDrive in the rear
Operation is the same as for the iDrive in the
front.
To adjust the volume: turn, arrows 1.
To activate the controller and switch between
the screens: press the buttons, arrows
2.
...
What to do if...
The current transmission position cannot be
displayed?
The vehicle is located in an unrecognized
region, is in a poor reception area, or the
system is currently determining the position. ...
Wiper system
1. Switching on wipers
2. Switching off wipers or brief wipe
3. Activating/deactivating intermittent wipe or rain sensor
4. Cleaning windshield and headlamps
5. Set ...