Updating the navigation data

General information

Navigation data are stored in the vehicle and can be updated.

Current navigation data and the authorization code are available from your service center.

► Depending on the data volume, a data update may take several hours.
► Update during the trip to preserve battery.
► During the update, only the basic functions of the navigation system are available.
► The status of the update can be viewed.
► The system restarts after the update.
► Remove the data carrier with the navigation data after the update.

Professional navigation system:

performing an update

1. Insert the navigation DVD into the DVD player with the labeled side facing up.
2. Follow the instructions on the Control Display.
3. Enter the navigation DVD authorization code.
4. Change the DVD, if necessary.

After interrupting your trip, follow the instructions on the Control Display.

Viewing the status

1. 2. "Navigation update" Press the button.
2. "Navigation update"

    See also:

    Windows
    To prevent injuries, watch the windows while closing them. Take the remote control out of the ignition when you leave the car; otherwise, children could operate the electric windows and possibly ...

    Headphones, vehicle loudspeakers
    Connecting the headphones Normal headphones Connect via the jack 1/8"/3.5 mm, on the rear CD/DVD player. Infrared headphones Connection via the infrared interface on the lower edge of the s ...

    Programming
    General information 1. Switch on the ignition. 2. Initial setup: Press and hold the left and right button on the interior rearview mirror simultaneously for approximately 20 seconds until the L ...