Adaptive light control

The concept

Adaptive light control is a variable headlamp control system that enables dynamic illumination of the road surface.

Depending on the steering angle and other parameters, the light from the headlamp follows the course of the road.

Activating

Switch position ignition switched with the ignition switched on.

The turning lamps are automatically switched on depending on the steering angle or the use of turn signals.

To avoid blinding oncoming traffic, the Adaptive Light Control does not swivel to the driver's side when the vehicle is at a standstill.

When driving in reverse, only the turning lamp is active.

Self-leveling headlights

The self-leveling headlights feature adapts the light distribution to the contours of the road.

The light distribution is lowered on hilltops to avoid blinding oncoming traffic and tilted in depressions to increase visibility.

Malfunction

A Check Control message is displayed.

Adaptive light control is malfunctioning or has failed. Have the system checked as soon as possible.

    See also:

    Starting aid terminals
    Connecting order Connect the jumper cables in the correct order; otherwise, there is the danger of injury from sparking.◀ The so-called starting aid terminal in the engine compartmen ...

    Automatic climate control
    1 Vent settings 2 Air volume 3 AUTO program 4 Interior temperature sensor — always keep clear 5 Recirculated-air mode 6 Temperature 7 Defrosting windows and removing condensation 8 Cooling f ...

    Switching off automatically
    The system switches off and the LED goes out: After approx. 160 ft/50 m when driving forward. Above approx. 22 mph/36 km/h when driving forward. Switch on the system again if necessary. ...