Parking lamps/low beams,headlamp control
General information
Switch position: 0,
,
If the driver door is opened with the ignition switched off, the exterior lighting is automatically switched off at these switch settings.
Parking lamps
Switch position 
: the vehicle
lamps light
up on all sides, e.g., for parking.
Do not use the parking lamps for extended periods; otherwise, the battery may become discharged and it would then be impossible to start the engine.
When parking, it is preferable to switch on the one-sided roadside parking lamps, refer to page 86.
Low beams
Switch position 
with the ignition
switched
on: the low beams light up.
See also:
Enabling
Enabling operation in the rear
Only possible via the iDrive in the front.
1. "Settings"
2. "Allow rear control"
3. Select the desired priority.
Priority options
The driver ...
Calling up the desired speed and
distance
While driving
Press the button with the system
switched on.
In the following cases, the stored speed value is
deleted and cannot be called up again:
▷ When the system is switched off.
& ...
Settings for the map view
The settings are stored for the remote control
currently in use.
1. "Navigation"
2. "Map"
3. "Options" Open.
4. "Settings"
Set the map view.
▷ &qu ...