Fold-out position of the wipers

Fold-out position of the wipers Required when changing the wiper blades or under frosty conditions, for example.

1. Switch off the ignition.
2. Under frosty conditions, ensure that the wiper blades are not frozen onto the windshield.
3. Press the wiper lever up beyond the point of resistance and hold it for approx. 3 seconds, until the wiper remains in a nearly vertical position.

After the wipers are folded back down, the wiper system must be reactivated.

Before switching the ignition on, fold the Fold the wipers back down
Before switching the ignition on, fold the wipers back down to the windshield; otherwise, the wipers may become damaged when they are switched on.◄

1. Switch on the ignition.
2. Press the wiper levers down. The wipers move to their resting position and are ready for operation.

    See also:

    Turn signals, front
    24-watt bulb, PY24W 1. Rotate bulb holder to the left and remove it along with the bulb. 2. Rotate the bulb to the right along with the socket and replace. 3. Install in the reverse order. ...

    Opening/closing the sliding visor
    Press the switch in the desired direction to the resistance point and hold it there. The sliding visor moves while the switch is being held. Press the switch in the desired directio ...

    Tachometer
    Always avoid engine speeds in the red warning field. In this range, the fuel supply is interrupted to protect the engine. ...