Intermittent operation or rain sensor
The concept
The rain sensor automatically controls the time between wipes depending on the intensity of the rainfall. The sensor is located on the windshield, directly behind the interior rearview mirror.
Activating/deactivating
Press the button on the wiper lever.
The LED in the steering column stalk lights up.
Deactivate the rain sensor in car washes
Deactivate the rain sensor when passing
through an automatic car wash; otherwise, damage
could be caused by undesired wiper activation.◄
Setting the frequency or sensitivity of the rain sensor
Turn the thumbwheel.
See also:
Programming
LED, arrow 1.
Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press both outer buttons 1 and 3 for approx.
20 seconds until the L ...
Adding engine oil
Filler neck
BMW X5
BMW X6
Add a maximum quantity of 1 US quart/1 liter of
oil only after the corresponding message appears
on the Control Display.
Add oil promptly
Add oil within the ne ...
Automatic Service Request
The Teleservice data necessary for servicing the vehicle are automatically sent
to your BMW center prior to the service deadline. If possible, the center will contact
you and a service appointment ...