Switching the wipers on/off and briefwipe
Do not switch on the wipers if frozen
Do not switch on the wipers if they are frozen
onto the windshield; otherwise, the wiper
blades and the windshield wiper motor may be
damaged.◄
Switching on
Press the wiper levers up.
The lever automatically returns to its initial position when released.
► Normal wiping speed: press up once.
The wipers switch to intermittent operation
when the vehicle is stationary.
► Fast wiping speed: press up twice or press
once beyond the resistance point.
The wipers switch to normal speed when the vehicle is stationary.
Switching off and brief wipe
Press the wiper levers down.
The lever automatically returns to its initial position when released.
► Brief wipe: press down once.
► To switch off normal wipe: press down once.
► To switch off fast wipe: press down twice.
See also:
Self-leveling suspension
The concept
The self-leveling suspension on the rear axle
assures a continuous ground clearance.
To do so, the height of the vehicle is measured
by sensors at both rear wheels.
If the actual he ...
Sockets
The lighter socket can be used as a socket for
electrical equipment while the engine is running
or when the ignition is switched on. The total
load of all sockets must not exceed 140 watts at
...
Checking the pressure
Only check the tire inflation pressure when the
tires are cold. This means after driving no more
than 1.25 miles/2 km or when the vehicle has
been parked for at least 2 hours. When the tires
a ...