Automatic Hold
The concept
This system assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic.
The vehicle is automatically held in place when it is stationary.
On inclines, the system prevents the vehicle from rolling backward when driving away.
For your safety
Under the following conditions, Automatic Hold is automatically deactivated and the parking brake is set:
► The engine is switched off.
► A door is opened and driver's safety belt is
unbuckled while the vehicle is stationary.
► The moving vehicle is brought to a standstill
using the parking brake.
The indicator lamp switches from
green
to red and the letters AUTO H go out.
Lower lamp: indicator lamp in
Canadian
models.
Before driving away:
► Release the parking brake manually.
► Reactivate Automatic Hold.
Leaving the vehicle with the engine running
Before leaving the vehicle with the engine running,
engage position P of the automatic transmission
and ensure that the parking brake is set.
Otherwise, the vehicle may begin to roll.◄
Activating
This function can be activated when the driver's door is closed and the safety belt is fastened, and while driving.
Press the button.
The LED and the letters AUTO H light
The indicator lamp lights up.
Automatic Hold is activated.
Deactivating
Press the button again.
The LED and the letters AUTO H go out.
Automatic Hold is deactivated.
If the vehicle is being held by Automatic Hold, press on the brake pedal to deactivate it.
When the parking brake is set manually, Automatic Hold is deactivated automatically.
Driving
Automatic Hold is activated: the vehicle is automatically secured against rolling when it stops.
The indicator lamp lights up
green.
Step on the accelerator pedal to drive off.
The brake is released
automatically.
The indicator lamp goes out.
Lower lamp: indicator lamp in Canadian models
Before driving into a car wash
Deactivate Automatic Hold; otherwise, the
parking brake will be set when the vehicle is stationary
and the vehicle will no longer be able to
roll.◄
Parking
The parking brake is automatically set if the engine is switched off while the vehicle is being held by Automatic Hold.
The indicator lamp changes from
green
to red.
The parking brake is not set if
the engine
is switched off while the vehicle is coasting
to a halt. Automatic Hold is deactivated.
Lower lamp: indicator lamp in Canadian models
Automatic Hold remains activated during an engine stop brought about by the Auto Start/Stop function.
Take the remote control with you
Take the remote control with you when
leaving the vehicle so that children, for example,
cannot release the parking brake.◄
See also:
System limits
Check the traffic situation as
well
PDC cannot serve as a substitute for the
driver's personal judgment of the traffic situation.
Check the traffic situation around the vehicle
with your own ...
Maintaining/storing the speed
Press the button.
When the system is switched on, the
current speed is maintained and stored as the
desired speed.
It is displayed in the speedometer and briefly
displayed in the instrument c ...
Roller sunblinds for the rear side windows
Pull the loop of the roller sun blind and hook onto
bracket.
Do not open the window while the roller
sunblind is tilted
Do not open the window while the roller sunblind
is tilted; otherwise, ...