Releasing

With the ignition switched on:

the switch Automatic transmission: Press the switch while the brake is pressed or transmission position P is engaged.

The LED and indicator lamp go out.

The parking brake is released.

Automatic Release in cars with automatic transmission

For automatic release, operate the accelerator pedal.

The LED and indicator lamp go out.

Subject to the following requirements, the parking brake is automatically released by operation of the accelerator pedal:

► Engine on.
► Drive position engaged.
► Driver buckled in and doors closed.

pedal Inadvertent operation of the accelerator pedal
Make sure that the accelerator pedal is not operated unintentionally; otherwise, the vehicle is set in motion and there is a risk of an accident.◄

    See also:

    Roadside parking lamps
    The vehicle can be illuminated on one side. Switching on With the ignition switched off, press the lever either up or down past the resistance point for approx. 2 seconds. Switching off Brie ...

    Malfunction
    The yellow warning lamp flashes and then lights up continuously. A Check Control message is displayed. No flat tire can be detected. Display in the following situations: ▷ A wheel wit ...

    Adjusting the volume
    Adjusting the volume Turn the knob until the desired volume is selected. The setting is stored for the remote control currently in use. The vehicle automatically adjusts the volume of the mic ...