Activating/deactivating the systemmanually

BMW X3 / BMW X3 iDrive Owners Manual / Controls / Driving / Auto Start/Stop function / Activating/deactivating the systemmanually

Using the button

Press the button.

Press the button.

► LED comes on: Auto Start Stop function is deactivated.

The engine is started during an automatic engine stop.

The engine can only be stopped or started via the Start/Stop button.

► LED goes out: Auto Start Stop function is activated.

Switching off the vehicle during an automatic engine stop

During an automatic engine stop, the vehicle can be switched off permanently, e.g., when leaving it.

1. Press the Start/Stop button. The ignition is switched off. The Auto Start/Stop function is deactivated.

Automatic transmission: the transmission position P is engaged automatically.

2. Set the parking brake.

Engine start as usual via Start/Stop button.

    See also:

    Notes
    Steam jets or high-pressure washers When using steam jets or high-pressure washers, hold them a sufficient distance away and use a maximum temperature of 140 ℉/ 60 ℃. Holding th ...

    Driving tips
    This section provides you with information useful in dealing with specific driving and operating conditions. ...

    Important features in the engine compartment
    Important features in the engine compartment 1 Jump-starting, negative terminal 2 Vehicle identification number 3 Washer fluid reservoir 4 Jump-starting, positive terminal 5 Engine compartment ...