Initializing after a power failure

After a power failure during the opening or closing process, the roof can only be operated to a limited extent.

Initializing the system

The system can be initialized when the vehicle is stationary and the engine is running.

During the initialization, the roof closes without pinch protection.

Monitor the closing process and make Danger of pinching
Monitor the closing process and make sure that the closing path of the glass sunroof is clear; otherwise, injuries may result.◄

until the initialization is complete: Press the switch up and hold it until the initialization is complete:

► Initialization begins within 15 seconds and is completed when the sunroof and sliding visor are completely closed.

► The roof closes without pinch protection.

    See also:

    Setting compass zones
    Set the compass zone corresponding to the vehicle's geographic location so that the compass Setting compass zones Press the adjustment button for 3‑4 seconds. The number of the compass zo ...

    Changing between panels
    After a menu item is selected, e.g., "Radio", a new panel is displayed. Panels can overlap. ▷ Move the controller to the left. The current panel is closed and the previous panel ...

    Date
    The date is displayed in the instrument cluster. Set the date on the Control Display, refer to page 83. ...