Pinch protection system

If the closing force exceeds a specific value as a window closes, the closing action is interrupted.

The window reopens slightly.

Even with the pinch protection system, check Danger of pinching even with pinch protection
Even with the pinch protection system, check that the window's closing path is clear; otherwise, the closing action may not stop in certain situations, e.g., if thin objects are present.◄

Do not install any accessories in the range No window accessories
Do not install any accessories in the range of movement of the windows; otherwise, the pinch protection system will be impaired.◄

Closing without the pinch protection system

Monitor the closing process and make Danger of pinching
Monitor the closing process and make sure that the closing path of the window is clear; otherwise, injuries may result.◄

For example, if there is an external danger or if ice on the windows prevents a window from closing normally, proceed as follows:

1. Pull the switch past the resistance point and hold it there.

Pinch protection is limited and the window reopens slightly if the closing force exceeds a certain value.

2. Pull the switch past the resistance point again within approx. 4 seconds and hold it there.

The window closes without pinch protection.

    See also:

    Oil types for refilling
    Notes No oil additives Oil additives may lead to engine damage. Viscosity grades for engine oils When selecting an engine oil, ensure that the engine oil belongs to one of the viscosity grad ...

    Signal tones
    When approaching an object, an intermittent tone is sounded that indicates the position of the object. For example, if an object is detected to the left rear of the vehicle, a signal tone sounds ...

    Supplementary text messages
    Addition information, such as on the cause of a fault or the required action, can be called up via Check Control. In urgent cases, this information will be shown as soon as the corresponding la ...