Context help - Owner's Manual to thetemporarily selected function
The relevant information can be opened directly.
Opening during operation via iDrive
To move directly from the application on the Control Display to the options menu:
1. 
Press the button or move the
controller
to the right repeatedly until the "Options"
menu is displayed.
2. "Display Owner's Manual"
Opening when a Check Control message is displayed
Directly from the Check Control message on the Control Display:
"Display Owner's Manual"
Changing between a function and the Owner's Manual
To change from a function, e.g., radio, to the Owner's Manual on the Control Display and to switch between the two displays:
1. 
Press the button or move the
controller
to the right repeatedly until the "Options"
menu is displayed.
2. "Display Owner's Manual" 3. Select the desired page in the Owner's Manual.
4. 
Press the button again to return
to the
function displayed last.
5. 
Press the button to return to
the page
of the Owner's Manual displayed last.
To switch back and forth repeatedly between the function displayed last and the page of the Owner's Manual displayed last, repeat steps 4 and 5. This opens a new panel every time.
See also:
Speed limit
Display of a speed limit which, when reached,
should cause a warning to be issued.
The warning is repeated if the vehicle speed
drops below the set speed limit once by at least
3 mph/5 km/h.
Di ...
Ignition on
All electrical consumers can operate. The odometer
and trip odometer are displayed in the
instrument cluster.
To save battery power when the engine is off,
switch off the ignition and any unnec ...
External temperature
External temperature warning
If the display drops to +37 ℉/
+3 ℃, a signal sounds.
A Check Control message is displayed.
There is the increased danger of
ice.
Ice on roads
Even ...