The concept

► Most functions that are displayed on the Control Display can be operated by spoken commands via the voice activation system.

The system prompts you to make your entries.

► Functions that can only be used when the vehicle is stationary cannot be operated using the voice activation system.
► The system uses a special microphone on the driver's side.
► ›...‹ Verbal instructions in the Owner's Manual to use with the voice activation system.

    See also:

    Functional requirements
    The system must have been reset when the inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Always use wheels with TPM electronics to ensure that the ...

    TRACTION
    When TRACTION is active, the vehicle has maximum traction on loose road surfaces. DTC Dynamic Traction Control,  is activated. Driving stability is limited during acceleration and when dri ...

    Viewing stored Check Control messages
    Viewing stored Check Control messages 1. Press the button on the turn signal lever downward. "CHECK OK" or the stored Check Control messages appear on the display. „CHECK OK“ is show ...