Adjusting the volume
Turn the knob until the desired volume is selected.
The setting is stored for the remote control currently in use.
The vehicle automatically adjusts the volume of the microphone on the telephone and the volume of the called party. Depending on the mobile phone, the volumes may need to be adjusted.
The settings can only be created during a call and must be adjusted separately for each telephone. The settings are deleted when the telephone is unpaired.
1. "Settings"
2. "Tone"
3. "Volume settings"
4. Select the desired setting: "Microphone" or "Loudspeak."
5. To adjust: turn the controller.
6. To store: press the controller.
See also:
Tire tread
Summer tires
Do not drive with a tire tread depth of less than
0.12 in/3 mm.
There is an increased danger of hydroplaning if
the tread depth is less than 0.12 in/3 mm.
Winter tires
Do not driv ...
Calls with multiple participants
General information
You can switch between calls or connect two
calls to a single conference call. These functions must be supported by the
mobile phone and
service provider.
Accepting a call ...
Opening and closing: from the
inside
Unlocking and opening
Either unlock the doors together using the
button for the central locking system and
then pull the door handle above the armrest
or
Pull the door opener twice in ...