Display
Night Vision with pedestrian detection is not available on the rear screen.
Adjustments via the iDrive
With Night Vision switched on:
1. Activate Night Vision with pedestrian detection.
2. Press the controller.
Open the desired menu item.
▷ 
"Brightness"
▷ 
"Contrast"
▷ 
"Pedestrian detection"
The settings are stored for the remote control currently in use.
See also:
Drive-off assistant
This system supports driving away on gradients.
The parking brake is not required.
1. Hold the vehicle in place with the foot brake.
2. Release the foot brake and drive away without
delay.
Depen ...
Switching off automatically
System switches off: above approx. 9 mph/
15 km/h.
Switch on the system again if necessary. ...
Opening and closing: from the inside
Opening and closing: from the inside ...