Visual warning

The approach of the vehicle to an object can be shown on the Control Display. Objects that are farther away are displayed on the Control Display before a signal tone sounds.

A display appears as soon as Park Distance Control (PDC) is activated.

If the backup camera image was selected last, it again appears on the display. To switch to PDC:

1. symbol "Rear view camera" Select the symbol on the Control Display.
2. Press the controller.

The setting is stored for the remote control currently in use.

Zoom view

On the left part of the display screen, the vehicle is shown enlarged.

▷ Forward gear or transmission position D engaged:

▷ Forward gear or transmission position D engaged:

front area of the vehicle.
▷ Reverse gear or transmission position R engaged:

rear area of the vehicle.

    See also:

    Washer fluid reservoir
    Adding washer fluid Only add washer fluid when the engine is cool, and then close the cover completely to avoid contact between the washer fluid and hot engine parts. Otherwise, there is the d ...

    Notes
    Switch off the engine before refueling Always switch off the engine before refueling; otherwise, fuel cannot be added to the tank and a message will be displayed.◀ Observe when handlin ...

    Following the initial pairing
    ▷ The mobile phone is detected/connected in the vehicle within a short period of time when the engine is running or the ignition is switched on. ▷ After they have been identified, p ...