Signal tones
When approaching an object, an intermittent tone is sounded that indicates the position of the object. For example, if an object is detected to the left rear of the vehicle, a signal tone sounds from the left rear speaker.
The shorter the distance to the object becomes, the shorter the intervals.
If the distance to a detected object is less than approx. 12 in/30 cm, a continuous tone is sounded.
If objects are located both in front of and behind the vehicle, an alternating continuous signal is sounded.
The intermittent tone is interrupted after approx.
3 seconds:
▷ If the vehicle stops in front of an object that
is detected by only one of the corner sensors.
▷ If moving parallel to a wall.
The signal tone is switched off:
▷ When the vehicle moves away from an object
by more than approx. 4 in/10 cm.
▷ When transmission position P is engaged.
Volume
You can set the volume of the PDC signal tone, The setting is stored for the remote control currently in use.
See also:
Controls
The audio and video sources can be controlled using the:
> Buttons near the CD/DVD player
> iDrive
> Buttons on the steering wheel,
> Programmable memory keys,
> Voice activation s ...
Opening
Press the switch to the resistance
point.
The window opens while the switch is held.
Press the switch beyond the resistance
point.
The window opens automatically.
Pressing again stop ...
Interior
The 128i's interior design is fairly traditional, with more upright shapes
than sweeping contours. Dual-zone climate controls sit below the center air
vents and optional navigation system, with BM ...