Configuring the prewarning
After the warning function is switched on, the following can be set via the iDrive:
▷ The prewarning can be switched on/off.
▷ The time of the prewarning can be set.
These settings have no effect on the time of the warning from the Active Cruise Control that prompts the driver to intervene or brake.
See also:
Displaying the button assignment
Use a finger to touch the buttons. Do not wear
gloves or use objects.
The key assignment is displayed at the top edge
of the screen.
Displaying the button assignment
▷ To display short ...
Switching off automatically
System switches off: above approx. 9 mph/
15 km/h.
Switch on the system again if necessary. ...
Hood
Releasing
Pull the lever.
Opening
To avoid damage, make sure that the wiper arms
are against the windshield before you open the engine compartment. Do not open the
engine hood before the engin ...