Displays in the instrument cluster
Selected program
The selected program is
displayed
in the tachometer.
Program selection
Pressing the button displays a
list
of the selectable programs.
Display on the Control Display
Program changes can be displayed briefly on the Control Display.
To do so, make the following settings:
1. "Settings"
2. "Driving mode"
3. "Driving mode info"
See also:
Deactivating HDC
Press the button again and the
LED goes
out. HDC is automatically deactivated
above approx. 37 mph/60 km/h. ...
Supplementary text messages
Addition information, such as on the cause of a
fault or the required action, can be called up via
Check Control.
The supplementary text of urgent messages is
automatically displayed on the Cont ...
Coolant level
Checking
1. Let the engine cool.
2. Turn the cap of the expansion tank slightly
counterclockwise to allow any excess pressure
to dissipate, and then open it.
3. The coolant level is correct if ...