Deactivating DSC: DSC OFF

When DSC is deactivated, driving stability is reduced during acceleration and when driving in bends.

Stabilizing interventions by the Integral Active Steering system are only performed by the rear axle steering.

To increase vehicle stability, activate DSC again as soon as possible.

Deactivating DSC

not longer Press and hold the button, but not longer than approx. 10 seconds, until the indicator lamp for DSC lights up in the instrument cluster and DSC OFF is displayed.

The DSC system is switched off.

Activating DSC

DSC OFF and the DSC indicator lamp Press the button.

DSC OFF and the DSC indicator lamp go out.

Indicator/warning lamps

When DSC is deactivated, DSC OFF is displayed in the instrument cluster.

DSC is deactivated. The indicator lamp lights up: DSC is deactivated.

    See also:

    Safety switch for the rear
    Press the button on the driver's door if children are being transported in the rear. This locks various functions so that they cannot be operated from the rear: safety switch. ...

    The concept
    This system issues a warning at speeds above approx. 40 mph/65 km/h if the vehicle is about to leave the lane on roads with lane markings. The steering wheel begins vibrating gently. The syste ...

    Operating from the outside
    ▷ Via the remote control. ▷ Via the door handles of the driver's and front passenger doors. The following takes place simultaneously when locking/unlocking the vehicle via the remote ...