The concept
The system does not measure the actual inflation pressure in the tires.
It detects a pressure loss in a tire by comparing the rotational speeds of the individual wheels while moving.
In the event of a pressure loss, the diameter and therefore the rotational speed of the corresponding wheel change. This is detected and reported as a flat tire.
See also:
Setting the voice dialog
You can set whether the system should use the
standard dialog or a shorter version.
In the shorter variant of the voice dialog, the announcements
from the system are issued in an
abbreviated fo ...
Destination guidance with traffic
bulletins
Semi-dynamic destination guidance
When traffic bulletin reception is switched on,
semi-dynamic destination guidance is active.
The destination guidance system takes the
available traffic informa ...
Viewing stored Check Control messages
Viewing stored Check Control messages
1. Press the button on the turn signal lever
downward. "CHECK OK" or the stored
Check Control messages appear on the display.
„CHECK OK“ is show ...