Status display
The tire and system status is indicated by the color of the tires.
A change in the tire inflation pressure during driving is taken into account.
A correction is only necessary if this is indicated by the TPM
Wheels, green
The tire inflation pressure is equal to the target state.
One wheel is yellow
A flat tire or major drop in inflation pressure in the indicated tire.
All wheels are yellow
▷ A flat tire or major drop in inflation pressure
in several tires.
▷ The system was not reset after a wheel
change and thus warns based on the inflation
pressures initialized last.
▷ A flat tire in one or more tires while the system
is being reset.
Wheels, gray
The system cannot detect a flat tire. Reasons for this may be:
▷ TPM is being reset.
▷ Disturbance by systems or devices with the
same radio frequency.
▷ Malfunction
For Canadian models: additional information
The status display additionally shows the current tire inflation pressures and tire temperatures.
When correcting the tire inflation pressures, note the following:
The tire pressure increases as the tire temperature increases.
Therefore, only correct the tire inflation pressure when the tire is at the ambient temperature.
Compare the displayed tire temperature with the external temperature in the instrument cluster.
See also:
Customer Relations
At a glance
Contact Customer Relations for information on
all aspects of your vehicle.
Calling Customer Relations
Vehicles not equipped with BMW
Assist or TeleService
1. "BMW Assist" ...
Assistance functions
Functional requirement
▷ The backup camera is switched on.
▷ The trunk lid is fully closed.
Pathway lines
Pathway lines
▷ Can be shown in the backup camera image
when in tra ...
In the center armrest in the rear
Storage is possible in a vertical or horizontal position
in the center armrest. ...