Rain sensor
The concept
The time between wipes is controlled automatically and depends on the intensity of the rainfall.
The sensor is located on the windshield, directly in front of the interior rearview mirror.
Activating/deactivating the rain sensor
Activating/deactivating the rain sensor
Press the button on the wiper lever.
When activated, the wipers move over the windshield once.
The LED in the steering column stalk lights up.
Deactivate the rain sensor in car washes<>
Deactivate the rain sensor when passing
through an automatic car wash; otherwise, damage
could be caused by undesired wiper activation.◀
Rain sensor sensitivity
Rain sensor sensitivity
Turn the thumbwheel.
See also:
Driving on poor roads
Your vehicle combines an all-wheel drive system
with the advantages of a normal passenger
car.
Do not drive on unpaved terrain
Do not drive on unpaved terrain, as otherwise
the vehicle may ...
Roadside Assistance
At a glanceBMW Roadside Assistancecan be contacted if assistance is needed in the
event of a breakdown.
Contact with BMW Roadside Assistancecan also be established using a Check
Control message.
...
Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press the button. The LED in
the
button lights up.
4. Press the desired button 1 or
2. The LED
goes out.
If the M button is pre ...