Releasing
With the ignition switched on:
Manual transmission: Press the
switch
while the brake or clutch is pressed.
Automatic transmission: Press the switch while the brake is pressed or transmission position P is engaged.
The LED and indicator lamp go out.
The parking brake is released.
Automatic Release in cars with automatic transmission
For automatic release, operate the accelerator pedal.
The LED and indicator lamp go out.
Subject to the following requirements, the parking brake is automatically released by operation of the accelerator pedal:
▷ Engine on.
▷ Drive position engaged.
▷ Driver buckled in and doors closed.
Inadvertent operation of the accelerator
pedal
Make sure that the accelerator pedal is not operated
unintentionally; otherwise, the vehicle is
set in motion and there is a risk of an accident.◀
See also:
General information
Lamps and bulbs make an essential contribution
to vehicle safety.
The manufacturer of the vehicle recommends
that you entrust corresponding procedures to
the service center if you are unfamiliar ...
Notes
▷ The ranges of Apps that can be displayed on
the Control Display depend on the range of
installed software applications on the mobile
phone.
▷ The data transmission of the software ...
Fuses
Replacing fuses
Never attempt to repair a blown fuse and
do not replace a defective fuse with a substitute
of another color or amperage rating; this could
lead to a circuit overload, ultimate ...
