Ignition on
Automatic transmission: press the Start/Stop button, and do not press on the brake pedal at the same time.
Manual-shift transmission: press the Start/Stop button, and do not press on the clutch pedal at the same time.
All vehicle systems are ready for operation.
Most of the indicator and warning lamps in the instrument cluster light up for varying lengths of time.
To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers.
The ignition switches off automatically:
▷ When the vehicle is locked, if the low beams
are switched on.
▷ Shortly before the battery is discharged
completely, so that the engine can still be
started.
▷ If the engine is switched off and the ignition
is switched on, the system automatically
switches to the radio ready state when the
door is opened if the lights are switched off
or the daytime running lights are switched
on.
See also:
New remote controls
You can obtain new remote controls from your
service center. ...
Flat Tire Monitor FTM
The conceptThe system does not measure the actual inflation pressure in the tires.
The system detects a pressure loss in a tire by comparing the rotational speeds
of the individual wheels while mov ...
Loading
Overloading the vehicle
To avoid exceeding the approved carrying
capacity of the tires, never overload the vehicle.
Overloading can lead to overheating and increases
the rate at which damage d ...